1. Indicateur LED
treatment is necessary.
Please note that some units are equipped with
battery safety strip. Remove the strip from the battery
compartment before first use.
Phase 1,41 Man Yue St.,
Hung Hom, Kowloon,
Hong Kong
3. Battery compartment
4. RESET hole
5. CHANNEL switch
STRONG
SIGNAL
Station Météo Design
WEAK SIGNAL
NO SIGNAL
•
a
2. Trou de fixation murale
3. Compartiment des piles
4. Fente RESET (Réinitialiser)
5. Bouton CHANNEL (Canal)
Modèle:BAR210 / BAR210U / BAR210A
is in conformity with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: 1) This device
may not cause harmful interference. 2) This device must
accept any interference received, including interference
that may cause undesired operation.
MANUEL DE L’UTILISATEUR
GETTING STARTED
POWER SUPPLY
SET CLOCK
NOTE The technical specifications for this product and the
contents of the user manual are subject to change without
notice.
Weather Light
Model: BAR210 / BAR210U / BAR210A
To set the clock manually, disable the signal reception
first.
Batteries serve as back up power supply for the clock.
For continuous use of LCD backlight, always plug in the
adapter socket. Make sure the socket outlet is easily
accessible to the unit.
POUR COMMENCER
FR
1. Press and hold CLOCK.
USER MANUAL
2. Press
or
to change the settings.
Les piles n’ont qu’une fonction d’alimentation de secours
pour l’horloge. Si vous désirez utiliser continuellement
le rétro éclairage de l’écran LCD, veuillez brancher
l’adaptateur secteur.
facilement accessible.
SPECIFICATIONS
VUE D’ENSEMBLE
ECRAN LCD
3. Press CLOCK to confirm.
4. The settings order is: time zone offset, 12/24 hr format,
hour and minute.
BAR210 / BAR210U: Time zone offset sets the clock +/-
23 hours from the received clock signal time. If you have
deactivated the clock signal reception, do not set a value
for time zone offset.
TYPE
DESCRIPTION
MAIN UNIT
Assurez-vous que la prise soit
To insert batteries:
EN
70 x 80 x 206 mm
(2.76 x 2.76 x 8.11 in)
L x W x H
OVERVIEW
235 g (8.3 oz)
without battery
Weight
Insérer les piles :
LCD DISPLAY
1
-5°C to 50°C
(23°F to 122°F)
Indoor Temperature range
BAR210A: Select the time zone: (P) Pacific, (E) Eastern,
(C) Central or (M) Mountain.
4
Outdoor Temperature
range
-30°C to 50°C
(-22°F to 122°F)
2
3
5
6
1. Remove the battery compartment and insert the
batteries, matching the polarities.
2. Press RESET after each battery change.
1
Resolution
0.1°C (0.2°F)
433 MHz
CHANGE DISPLAY
Signal frequency
•
To change to auto toggle mode (clock > outdoor tem-
perature > indoor temperature), slide AUTO ON / OFF
to ON.
2 x CR2032 batteries
AC / DC adapter
4
2
3
Power
5
1. Ouvrez le compartiment des piles et insérez les piles en
respectant les polarités (+/-).
6
indicates main unit batteries are low.
REMOTE UNIT (THN132N)
L x W x H
•
To manually toggle between time and temperature
displays, press CLOCK or wave your hand at least 3
inches or less from the motion sensor located on the
top of the main unit.
92 x 60 x 20 mm
(3.6 x 2.4 x 0.8 in)
2. Appuyez sur RESET (REINITIALISER) après chaque
changement de piles.
REMOTE SENSOR
Weight
62 g (2.22 ounces)
The main unit can be connected to only 1 remote sensor.
Transmission range
30 m (98 ft) unobstructed
indique que les piles de l’appareil principal sont
faibles.
1. Icônes de prévisions météo
To set up the outside sensor:
1. Open the battery compartment.
2. Select a channel then press RESET.
3. Close the battery door.
4. Place the outside sensor within 30 m (98 ft) of the main
unit using the table stand or wall mount.
-40°C to 60°C
(-40°F to 140°F)
Temperature range
Power
2. Indicateur de réception du signal de l’horloge
3. Affichage de l’heure et de la température
4. Indicateur de communication du capteur extérieur
5. Indicateur de faiblesse des piles
1 x UM-4 (AAA) 1.5 V
batteries
1. Weather forecast icons
2. Clock signal reception indicator
3. Time / temperature display
4. Outdoor sensor communication indicator
5. Low battery indicator
6. Time zone offset display
SONDE SANS FIL
La sonde transmet les informations à la station principale.
Installation du capteur extérieur :
ABOUT OREGON SCIENTIFIC
6. Affichage du fuseau horaire
TIP The transmission range may vary depending on many
factors. You may need to experiment with various locations
to get the best results.
1. Ouvrez le compartiment des piles.
more about Oregon Scientific products. If you’re in the US
and would like to contact our Customer Care department
directly, please visit: www2.oregonscientific.com/service/
support
2. Sélectionnez un canal puis appuyez sur RESET.
3. Fermez le couvercle du compartiment des piles.
FACE ARRIÈRE
BACK VIEW
NOTE Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures below
freezing.
4. Installez le capteur extérieur à 30 m maximum (98
pieds) de l’appareil principal à l’aide du support de
table ou de la fixation murale.
NOTE Auto toggle mode and motion sensor will be
disabled if a button is pressed, but will be enabled again if
no button is pressed for 5 seconds.
OR
Call 1-800-853-8883.
ASTUCE La gamme de transmission peut varier en
fonction de plusieurs facteurs. Vous pouvez expérimenter
plusieurs emplacements afin d’obtenir les meilleurs
résultats possibles.
For international inquiries, please visit:
www2.oregonscientific.com/about/international
SENSOR DATA TRANSMISSION
NOTE The installed CDS light sensor inside the unit will
activate automatic LCD dimming.
1
The main unit will automatically search for the outdoor
sensor. The sensor reception icon in the remote sensor
area shows the status:
FCC STATEMENT
REMARQUE Utilisez des piles alcalines pour un usage
prolongé et des piles au lithium pour la consommation lors
de températures inférieures au gel.
1
WEATHER FORECAST
ICON
DESCRIPTION
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) This
device must accept any interference received, including
interference that may cause undesired operation.
This product forecasts the next 12 to 24 hours of weather.
Main unit is searching for
sensor.
A channel has been found.
Sensor data received.
TRANSMISSION DES DONNÉES DU CAPTEUR
2
ICON
L’appareil principal recherchera immédiatement le capteur
extérieur. L’icône de réception du capteur situé sur la
zone du capteur à distance vous indique le statut de la
transmission :
WARNING Changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
1. Trous de ventilation
2. Prise de l’adaptateur
COLOR
Red
Green
Blue
2
MEANING
Sunny
Cloudy
Rainy
The sensor cannot be
found.
1. Ventilation hole
2. Adaptor socket
and “--.-“
ICONE
DESCRIPTION
NOTE This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation.
TEMPERATURE
NOTE If the sensor is not found, check the batteries,
obstructions and remote sensor location.
VUE DU BAS
Appareil principal à la
recherche du capteur.
To display temperature mode or select temperature
unit:
Press °C / °F.
BOTTOM VIEW
For best results:
1
Un canal a été trouvé.
4
•
Place the sensor out of direct sunlight and rain.
Position the sensor facing the main unit, minimizing
obstructions.
Place the sensor in a location away from metallic or
electronic objects.
1
•
•
•
4
5
NOTE Please keep the temperature sensor (adjacent to
the adaptor socket) away from electrical devices as heat
from these devices will affect accurate indoor temperature
readings.
2
3
Les données du capteur
sont en cours de
réception.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
5
2
3
Le capteur est
introuvable.
Position the sensor close to the main unit during cold
winter months.
6
is no guarantee that interference will not occur in
a
et ‘’-- :-‘’
6
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
RESET
Press RESET to return to the default settings.
REMARQUE Si le capteur n’est pas localisé, vérifiez
les piles, les obstructions possibles et l’emplacement du
capteur à distance.
CLOCK
1.
/
: Augmente / diminue les réglages ; active /
CLOCK RECEPTION
désactive le signal de réception de l’horloge
1.
/
:
Increase
/
decrease setting; activate
/
PRECAUTIONS
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Pour obtenir de meilleurs résultats :
This product is designed to synchronize its clock
automatically with a clock signal.
BAR210:
deactivate clock reception signal
2. RESET (REINITIALISER) : Réinitialise l’appareil aux
réglages par défaut
•
•
•
•
•
•
•
•
•
Do not subject the unit to excessive force, shock, dust,
temperature or humidity.
Do not cover the ventilation hole with any items such
as newspapers, curtains etc.
Do not immerse the unit in water. If you spill liquid over
it, dry it immediately with a soft, lint-free cloth.
Do not clean the unit with abrasive or corrosive
materials.
Do not tamper with the unit’s internal components. This
invalidates the warranty.
Only use fresh batteries. Do not mix new and old
batteries.
Images shown in this manual may differ from the actual
display.
When disposing of this product, ensure it is collected
separately for special treatment.
Placement of this product on certain types of wood
may result in damage to its finish for which Oregon
Scientific will not be responsible. Consult the furniture
manufacturer's care instructions for information.
The contents of this manual may not be reproduced
without the permission of the manufacturer.
Do not dispose old batteries as unsorted municipal
waste. Collection of such waste separately for special
•
•
•
•
Ne placez pas le capteur directement face aux rayons
du soleil ou en contact avec des matières humides.
2. RESET: Reset unit to default settings
3. AUTO ON / OFF: Select auto toggle mode
4. CLOCK: Set time and display mode
5. °C / °F: Select temperature unit and display mode
6. Battery compartment
•
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician
for help.
•
EU: DCF-77 signal: within 1500 km (932 miles) of
Frankfurt, Germany.
3. AUTO ON / OFF: Sélectionne le mode d’alternance
automatique
Installez le capteur face
réduisant les obstructions possibles.
à
l’appareil principal en
BAR210U:
UK: MSF-60 signal: within 1500 km (932 miles) of
Anthorn, England.
BAR210A:
WWVB-60 signal: within 3200km (2000 miles) of Fort
Collins Colorado.
4. CLOCK : Règle l’heure et le mode d’affichage
Placez le capteur directement vers le ciel, éloigné des
objets métalliques et électroniques.
•
5. °C / °F: Sélectionne l’unité de température et le mode
d’affichage
DECLARATION OF CONFORMITY
REMOTE SENSOR
Installez le capteur à proximité de l’appareil principal
pendant les périodes froides de l’hiver.
•
6. Compartiment des piles
The following information is not to be used as contact for
support or sales. Please call our customer service number
the warranty card for this product) for all inquiries instead.
To enable / disable signal reception:
SONDE SANS FIL
HORLOGE
Press and hold
reception.
to enable or
to disable signal
RÉCEPTION DE L’HORLOGE
We
Name:
Address:
Oregon Scientific, Inc.
19861 SW 95th Ave.,Tualatin,
Oregon 97062 USA
Ce produit est conçu pour synchroniser automatiquement
l’horloge avec le signal radio.
NOTE Reception takes 2-10 minutes. If the signal is weak,
it can take up to 24 hours to get a valid signal.
BAR210 :
Telephone No.:
1-800-853-8883
Clock signal reception indicator:
•
EU : Signal DCF-77 : dans un rayon de 1500 Km (932
miles) depuis Frankfort, Allemagne.
declare that the product
Product No.:
Product Name:
Manufacturer:
Address:
BAR210 / BAR210U / BAR210A
Weather Light
IDT Technology Limited
Block C, 9/F, Kaiser Estate,
•
•
BAR210U:
UK : Signal MSF-60 : dans un rayon de 1500 Km (932
1. LED status indicator
2. Wall mount hole
•
BAR210 USA IM R3.indd
1
9/18/07 10:29:58 AM
|