AM1 (NZ BASIC)
SWITCHES
HIGH CONTACT CAPACITY,
PRECISE OPERATION
FEATURES
TYPICAL APPLICATION
• 10 A High current switching capacity
and high precision
• General industrial machinery
• Medical equipment
17.5
49.2
• Wide allowance of operating speed
• Versatile variety of actuators
• UL/C-UL approved
• Measuring instruments
• Transportation equipment
• Home electric appliances
24.1
Compliance with RoHS Directive
ORDERING INFORMATION
Ex. AM
1
5
0
1
K
F
Type of
switch
Basic
specifications
Upper body cover shape & terminal
Actuators
Contact
NZ basic 1: Flat, solder terminal
Upper body cover shape
0: Standard type 0: Pin plunger
F: Cadmium
free
(AM1)
switch
3: Flat, screw terminal
5: Grooved, solder terminal
7: Grooved, screw terminal
1: Oil tight type
3: Reversed
action type
1: Hinge lever (leaf spring)
3: Hinge roller lever (roller, leaf, spring)
4: Hinge short roller lever
Flat
Grooved
4: One way type 5: Overtravel plunger
6: Compact overtravel plunger
7: Panel mount plunger
811: Panel mount roller plunger
812: Panel mount cross roller plunger
Remarks: Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
TERMINAL VARIATION
Standard types, reversed action types and oil tight types are available in two terminal designs, solder and screw terminals, as shown
in the above columns:
Differences in dimension between solder and screw terminals are as follows;
mm
Solder terminal
Screw terminal
6.3
9.1
49.2
49.2
N.O.
CIRCUT
C
NO
NC
17.5
17.5
N.C.
CIRCUT
Terminal plate
19.8
M4 screw P0.7
20.2
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
AM1
OPERATING CHARACTERISTICS
Standard types
Compact overtravel
plunger
Types of actuator
Pin plunger
Overtravel plunger
Panel mount plunger
Operating force, max.
3.63 N
1.12 N
0.4
Release force, min.
Pretravel, max. mm
Movement differential, max. mm
Overtravel, min. mm
0.05
0.13
1.5
1.5
5.6
Operating position, mm
15.9 0.4
28.2 0.5
21.2 0.5
21.8 0.8
Panel mount roller
plunger
Panel mount cross roller
plunger
Types of actuator
Flexible leaf lever
Flexible roller leaf lever
Operating force, max.
Release force, min.
3.63 N
1.47 N
1.12 N
0.4
0.14 N
4
Pretravel, max. mm
Movement differential, max. mm
Overtravel, min. mm
0.05
1.3
3.6
1.6
Operating position, mm
33.3 1.2
17.5 0.8
28.6 0.8
Standard types (cont' d)
Types of actuator
Rigid lever
0.69 N
0.14 N
10
Rigid short roller lever
Rigid roller lever
Operating force, max.
Release force, min.
1.57 N
0.42 N
4.5
0.98 N
0.2 N
7.5
Pretravel, max. mm
Movement differential, max. mm
Overtravel, min. mm
1.3
0.7
1.3
5.6
2.4
3.6
Operating position, mm
19.1 0.7
30.2 0.4
30.2 0.7
One way types
Types of actuator
Rigid short roller lever
Rigid roller lever
Operating force, max.
Release force, min.
2.23 N
0.42 N
3.5
1.67 N
0.42 N
4.5
Pretravel, max. mm
Movement differential, max. mm
Overtravel, min. mm
Free position, max. mm
Operating position, mm
0.4
0.5
1.5
2.4
31.8
43.3
30.2 0.4
41.3 0.4
Reversed action types
Types of actuator
Rigid lever
Rigid short roller lever
Rigid roller lever
Operating force, max.
Release force, min.
1.67 N
0.27 N
5.0
5.30 N
1.67 N
2.5
2.35 N
0.56 N
3.6
Pretravel, max. mm
Movement differential, max. mm
Overtravel, min. mm
0.9
0.4
0.7
5.6
2.0
4.0
Operating position, mm
19.1 0.8
30.2 0.5
30.2 0.8
Oil tight types
Types of actuator
Rigid lever
0.69 N
0.14 N
10
Rigid short roller lever
Rigid roller lever
0.98 N
0.20 N
7.5
Operating force, max.
Release force, min.
Pretravel, max. mm
Movement differential, max. mm
Overtravel, min. mm
Operating position, mm
1.67 N
0.42 N
4.5
1.5
0.7
1.3
5.6
2.4
3.6
19.1 0.7
30.2 0.4
30.2 0.7
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
AM1
mm General tolerance: 0.4
DIMENSIONS
1. Standard types
Pin plunger
Operating force,
max.
3.63 N
1.12 N
0.4
23.3 0.3
P. T.
2.4
Release force,
min.
O.P.
14.6
5.4
15
Pretravel,
max. mm
9.1
Movement differential,
max. mm
0.05
+0.1
4.2
dia. hole
−0.05
+0.1
4.2
−0.05
17.5
AM1100KF (Solder terminal)
AM1300KF (Screw terminal)
Overtravel,
min. mm
0.13
4.5 0.1
25.4 0.1
49.2
11.9
Operating position,
mm
15.9 0.4
Overtravel plunger
Operating force,
max.
3.63 N
1.12 N
0.4
23.3 0.3
4 dia.
6.35 dia.
Release force,
min.
Plunger: Hardening steel
P. T.
Pretravel,
max. mm
8.4
15
O.P.
Movement differential,
max. mm
0.05
Overtravel,
min. mm
AM1105KF (Solder terminal)
AM1305KF (Screw terminal)
1.5
Operating position,
mm
28.2 0.5
Compact over plunger
Operating force,
max.
3.63 N
1.12 N
0.4
Plunger: Plastic
P.T.
Release force,
min.
0.3
23.3
0.4 max.
7.1 dia.
4.2
Pretravel,
max. mm
O.P.
+0.10
–0.05
0.5
21.2
4.2
14.3 14.5
Movement differential,
max. mm
0.05
Overtravel,
min. mm
AM1106KF (Solder terminal)
AM1306KF (Screw terminal)
1.5
+0.10
4.2
dia.
–0.05
Operating position,
mm
21.2 0.5
Panel mount plunger
Plunger: Plastic
Operating force,
max.
R8
M12 × P1
3.63 N
1.12 N
0.4
P.T.
0.3
23.3
0.4 max.
8.25 dia.
Release force,
min.
Lock nut
(2 thick)
O.P.
Pretravel,
max. mm
0.8
21.8
Nut (2 thick)
13.1
Movement differential,
max. mm
0.05
0.5
+0.10
–0.05
16
4.2
14.3
Overtravel,
min. mm
5.6
Operating position,
mm
AM1107KF (Solder terminal)
AM1307KF (Screw terminal)
+0.10
–0.05
4.2
dia.
21.8 0.8
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
AM1
Panel mount roller plunger
mm General tolerance: 0.4
Operating force,
max.
3.63 N
1.12 N
0.4
Release force,
min.
P.T.
Roller 12.7 dia. × 4.6
: Plastic
0.4 max.
0.3
23.3
Pretravel,
max. mm
M12 × P1
Movement differential,
max. mm
0.05
O.P.
Nut (2 thick)
1.2
33.3
15.5
Overtravel,
min. mm
3.6
+0.10
–0.05
0.5
4.2
Operating position,
mm
16
14.3
AM110811KF (Solder terminal)
AM130811KF (Screw terminal)
33.3 1.2
+0.10
4.2
dia.
–0.05
Panel mount cross roller plunger
Operating force,
max.
3.63 N
1.12 N
0.4
Release force,
min.
Roller 12.7 dia. × 4.6
: Plastic
P.T.
0.3
0.4 max.
23.3
Pretravel,
max. mm
M12 × P1
Movement differential,
max. mm
0.05
O.P.
Nut (2 thick)
1.2
33.3
Overtravel,
min. mm
15.5
3.6
+0.10
–0.05
Operating position,
mm
0.5
4.2
16
33.3 1.2
14.3
AM110812KF (Solder terminal)
AM130812KF (Screw terminal)
+0.10
4.2
dia.
–0.05
Dimensions and Operating characteristics are the same as those of Panel mount roller plunger type. However, the roller joins the switch body at an angle of 90°.
Flexible leaf lever
Operating force,
max.
1.47 N
Release force,
min.
0.14 N
4
49.6 0.8
Leaf: Stainless steel
Pretravel,
max. mm
4.8
Movement differential,
max. mm
F.P.
O.P.
14.6
1.3
Overtravel,
min. mm
AM1101KF (Solder terminal)
AM1301KF (Screw terminal)
1.6
Operating position,
mm
17.5 0.8
Flexible roller leaf lever
Operating force,
max.
1.47 N
0.14 N
4
Roller 9.5 dia.×4:
Release force,
min.
Plastic
46 0.8
Leaf: Stainless steel
Pretravel,
max. mm
F.P.
O.P.
Movement differential,
max. mm
1.3
14.6
Overtravel,
min. mm
AM1103KF (Solder terminal)
AM1303KF (Screw terminal)
1.6
Operating position,
mm
28.6 0.8
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
AM1
mm General tolerance: 0.4
Rigid lever
Operating force,
max.
0.69 N
0.14 N
10
Lever: Stainless steel
26.1
Release force,
min.
R63.5
4.8
Pretravel,
max. mm
F.P.
Movement differential,
max. mm
20.1 0.5
O.P.
1.3
Overtravel,
min. mm
5.6
AM1501KF (Solder terminal)
AM1701KF (Screw terminal)
Operating position,
mm
19.1 0.7
Rigid short roller lever
Operating force,
max.
1.57 N
0.42 N
4.5
Roller 9.5 dia.×4:
26.1
Plastic
Release force,
min.
Pretravel,
max. mm
R26.7
Movement differential,
max. mm
F.P.
O.P.
0.7
20.1 0.5
Overtravel,
min. mm
2.4
Operating position,
mm
AM1504KF (Solder terminal)
AM1704KF (Screw terminal)
30.2 0.4
Rigid roller lever
Operating force,
max.
0.98 N
0.2 N
7.5
Roller 9.5 dia.×4:
Release force,
min.
26.1
Plastic
R48.3
Pretravel,
max. mm
Movement differential,
max. mm
F.P.
1.3
O.P.
20.1 0.5
Overtravel,
min. mm
3.6
AM1503KF (Solder terminal)
AM1703KF (Screw terminal)
Operating position,
mm
30.2 0.7
2. One way types
This type is operated only to one direction, not to the reversed direction by the construction of the roller lever, pivoting away from the
cam on the return stroke.
Rigid short roller lever
Operating force,
max.
2.23 N
Roller 4.75 dia.×4.75:
Plastic
Release force,
26.1
0.42 N
min.
Pretravel,
3.5
R21.1
max. mm
Movement differential,
0.4
27.8 max.
F.P.
max. mm
O.P.
20.1 0.5
Overtravel,
min. mm
1.5
AM1544KF (Solder terminal)
AM1744KF (Screw terminal)
Operating position,
mm
30.2 0.4
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
AM1
Rigid roller lever
mm General tolerance: 0.4
Operating force,
max.
1.67 N
0.42 N
4.5
Roller 9.5 dia.×4:
Plastic
26.1
Release force,
min.
R31
Pretravel,
max. mm
Movement differential,
max. mm
O.P. F.P.
0.5
34.1 max.
20.1 0.5
Overtravel,
min. mm
2.4
Operating position,
mm
41.3 0.4
AM1543KF (Solder terminal)
AM1743KF (Screw terminal)
3. Reversed action types
When the actuator is operated, the switching mechanism returns to the free position. Extraordinary force by pushing the plunger too
much is not put on the switching mechanism, which means stability in life.
Rigid lever
Lever: Stainless steel
4.8
18.7
Operating force,
max.
1.67 N
0.27 N
5.0
R56
Release force,
min.
F.P.
20.1 0.5
9.1
O.P.
Pretravel,
max. mm
16.9 0.8
Movement differential,
max. mm
0.9
+0.1
4.2
dia. hole
−0.05
+0.1
4.2
−0.05
Overtravel,
min. mm
4.5 0.1
5.6
17.5
11.9
25.4 0.1
11.9
AM1531KF (Solder terminal)
AM1731KF (Screw terminal)
Operating position,
mm
49.2
19.1 0.8
Rigid short roller lever
Operating force,
max.
5.30 N
1.67 N
2.5
Roller 9.5 dia.×4:
Plastic
Release force,
min.
18.7
Pretravel,
max. mm
R19
Movement differential,
max. mm
F.P.
O.P.
0.4
20.1 0.5
Overtravel,
min. mm
2.0
AM1534KF (Solder terminal)
AM1734KF (Screw terminal)
Operating position,
mm
30.2 0.5
Rigid roller lever
Operating force,
max.
2.35 N
0.56 N
3.6
Roller 9.5 dia.×4:
Plastic
Release force,
min.
18.7
R41
Pretravel,
max. mm
Movement differential,
max. mm
F.P.
0.7
O.P.
20.1 0.5
Overtravel,
min. mm
4.0
Operating position,
mm
AM1533KF (Solder terminal)
AM1733KF (Screw terminal)
30.2 0.8
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
AM1
mm General tolerance: 0.4
4. Oil tight types
The pushbutton part is sealed with the rubber cap and the connected part between the cap and body is also coated with resin so that
these parts are kept away from foreign matters. This type has resistance to oil.
Rigid lever
Operating force,
0.69 N
max.
Plunger seal
Lever: Stainless steel
Release force,
0.14 N
min.
26.1
Pretravel,
max. mm
R63.5
4.8
10
1.5
Movement differential,
max. mm
F.P.
20.1 0.5
O.P.
Overtravel,
min. mm
5.6
Operating position,
mm
19.1 0.7
AM1511KF (Solder terminal)
AM1711KF (Screw terminal)
Rigid short roller lever
Operating force,
max.
1.67 N
0.42 N
4.5
Plunger seal
Roller 9.5 dia.×4:
Release force,
min.
Plastic
26.1
Pretravel, max.
mm
R26.7
Movement differential,
max. mm
F.P.
O.P.
0.7
20.1 0.5
16.9 0.8
Overtravel,
min. mm
2.4
AM1514KF (Solder terminal)
AM1714KF (Screw terminal)
Operating position,
mm
30.2 0.4
Rigid roller lever
Operating force,
max.
0.98 N
0.20 N
7.5
Roller 9.5 dia.×4:
Plunger seal
Plastic
Release force,
min.
26.1
R48.3
Pretravel,
max. mm
F.P.
Movement differential,
max. mm
O.P.
1.3
20.1 0.5
16.9 0.8
Overtravel,
min. mm
3.6
Operating position,
mm
AM1513KF (Solder terminal)
AM1713KF (Screw terminal)
30.2 0.7
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
AM1
NOTES
1. Regarding fastening of switch body
1) In fastening the switch body, use M4
mounting screws to attach switches with
the torque 1.5 N·m or less.
3. Soldering operations
Soldering should be done in less than 5
seconds, with a 60 watt iron (tip
temperature = 350°C max.). Care should
be taken not to apply force to the terminal
during soldering.
2) After mounting and wiring, the
insulation distance between ground and
each terminal should be confirmed as
sufficient.
4. Avoid using switches in the
following conditions:
2. Adjustment of the operating device
The operating device should be
• In corrosive gases such as hydrogen
sulfide.
positioned so that it applies no stress to
the pushbutton or actuator when the
switch is in the open position. If this
condition is exceeded, the mechanical
and electrical performance will be
impaired. In addition, the force applied by
the operating device should be in a
perpendicular direction. Even if the
pushbutton is used in the full total travel
position, there will be no influence on the
life of the switch.
• In flammable or explosive gases such
as gasoline or thinner etc.
• In a dusty environment.
• In an ambient humidity over 85%.
• In conditions where the perpendicular
operating speed is less than 0.1 mm/sec.
or more than 1,000 mm/sec.
• In a silicon atmosphere.
5. Others
Caution should be taken not to drop
switches.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
|