0710182
02-29-08
Section 75
Battery Chargers – Sentry and Guardian Models
Features
•
High-quality constructed stainless steel cases,
suitable for wall mounting
•
Auto boost operation provides increased
output voltage when batteries are below a
preset point
•
•
Remote temperature compensation provides
control of output voltage based on temperature
Current limiting will only output the rated
current of the charger
The Sentry and Guardian battery chargers provide automatic, current limited and voltage controlled
charging to vented lead acid batteries. They may be used in a wise range of industrial charging
applications, including standby engines, pumps and generators.
Each unit consists of a transformer, rectifier and thyristor control circuit. The control circuit ensures that
the charger maintains a battery voltage at the pre-calibrated float level, while supplying any additional
load current up to the specified maximum.
Sentry Model
Guardian Model
•
•
•
•
•
•
•
CE and UL approvals
•
•
CE and UL approvals
Float Charging 5A at 12v
Auto boost operation
Electronic self-resetting output fuse protection
Temperature compensation
Charge fail relay output
Heavy duty float charging: 10A at 12/24 VDC,
20A at 24 VDC
•
•
•
•
•
•
•
Short circuit and reverse polarity protection
Lead acid calibrations
Auto boost operation
Charge fail relay output
Stainless steel enclosure
Under volts and over volts alarms
Temperature compensation
NFPA 110 alarms
Model
W
D
4.92”
(125mm)
5.71”
(145mm)
H
11”
(280mm)
12.20”
(310mm)
Weight
22 lbs
10.0Kg
38.5 lbs
17.5Kg
Model
BCES-12-5
W
11.1”
D
4.6”
H
5.5”
Weight
11.9 lbs
5.6Kg
BCEG-12-10
BCEG-24-10
BCEG-24-20
10.83”
(275mm)
13.9”
(281mm) (115mm) (140mm)
(335mm)
In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications and designs at any time.
MURPHY and the Murphy logo, are registered and/or common law trademarks of Murphy Industries, Inc. This document, including textual matter and
illustrations, is copyright protected by Murphy Industries, Inc., with all rights reserved. (c) 2007 Murphy Industries, Inc.
|