Panasonic Network Card 2SC4808G User Manual

This product complies with the RoHS Directive (EU 2002/95/EC).  
Transistors  
2SC4808G  
Silicon NPN epitaxial planar type  
For UHF band low-noise amplification  
Features  
Package  
Code  
SSMini3-F3  
Marking Symbol: 3M  
Pin Name  
1. Base  
Low noise figure NF  
High forward transfer gain S21e2  
High transition frequency fT  
SS-Mini type package, allowing downsizing of the equipment  
and automatic insertion through the tape packing.  
2. Emitter  
3. Collector  
Absolute Maximum Ratings Ta = 25°C  
Parameter  
Symbol  
Rating  
Unit  
V
Collector-base voltage (Emitter open) VCBO  
Collector-emitter voltage (Base open) VCEO  
Emitter-base voltage (Collector open) VEBO  
15  
10  
V
2
80  
V
Collector current  
IC  
PC  
Tj  
mA  
mW  
°C  
°C  
Collector power dissipation  
Junction temperature  
Storage temperature  
125  
125  
Tstg  
55 to +125  
Electrical Characteristics Ta = 25°C 3°C  
Parameter  
Symbol  
VCBO  
VCEO  
ICBO  
IEBO  
hFE  
Conditions  
Min  
15  
Typ  
Max  
Unit  
V
Collector-base voltage (Emitter open)  
Collector-emitter voltage (Base open)  
Collector-base cutoff current (Emitter open)  
Emitter-base cutoff current (Collector open)  
Forward current transfer ratio *  
Transition frequency  
IC = 10 µA, IE = 0  
IC = 100 µA, IB = 0  
10  
V
VCB = 10 V, IE = 0  
1
1
µA  
µA  
VEB = 2 V, IC = 0  
VCE = 8 V, IC = 20 mA  
VCE = 8 V, IC = 15 mA, f = 0.8 GHz  
VCB = 10 V, IE = 0, f = 1 MHz  
50  
5
150  
6
300  
fT  
GHz  
pF  
Collector output capacitance  
Cob  
0.7  
1.2  
(Common base, input open circuited)  
Forward transfer gain  
Maximum unilateral power gain  
Noise figure  
S21e2 VCE = 8 V, IC = 15 mA, f = 0.8 GHz  
11  
14  
15  
dB  
dB  
dB  
GUM  
NF  
VCE = 8 V, IC = 15 mA, f = 0.8 GHz  
VCE = 8 V, IC = 7 mA, f = 0.8 GHz  
1.3  
2.0  
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.  
2. : Pulse measurement  
*
Publication date: May 2007  
SJC00395AED  
 
1
This product complies with the RoHS Directive (EU 2002/95/EC).  
SSMini3-F3  
Unit: mm  
1.60 +00..0035  
0.26 +00..0025  
3
1
2
0.13 +00..0025  
(0.50)  
(0.50)  
1.00 0.05  
(5°)  
 
Request for your special attention and precautions in using the technical information and  
semiconductors described in this book  
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and  
regulations of the exporting country, especially, those with regard to security export control, must be observed.  
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples  
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other  
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other  
company which may arise as a result of the use of technical information described in this book.  
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office  
equipment, communications equipment, measuring instruments and household appliances).  
Consult our sales staff in advance for information on the following applications:  
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support  
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-  
ucts may directly jeopardize life or harm the human body.  
Any applications other than the standard applications intended.  
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-  
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product  
Standards in advance to make sure that the latest specifications satisfy your requirements.  
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions  
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute  
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any  
defect which may arise later in your equipment.  
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure  
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire  
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.  
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,  
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which  
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.  
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita  
Electric Industrial Co., Ltd.  
 

Multiquip Power Roller GX390K1SM32 User Manual
NEC All in One Printer 703 A0368 001 User Manual
NEC Microwave Oven N230S User Manual
New Buck Corporation Indoor Fireplace MODEL FP 327 ZC User Manual
Nostalgia Electrics Popcorn Poppers MHP 310 User Manual
Optiview Security Camera CM27X User Manual
Oricom Cell Phone PMR1000R User Manual
Oster Bread Maker 5858 User Manual
Panasonic DVD Recorder DMR ES40V User Manual
Panasonic Switch MA2DF62 User Manual