Panasonic Automobile Electronics DMC TZ20 User Manual

Basic Operating Instructions  
Digital Camera  
Model No.  
DMC-TZ20  
Before use, please read these instructions completely.  
More detailed instructions on the operation  
of this camera are contained in “Operating  
Instructions for advanced features (PDF format)”  
in the supplied CD-ROM. Install it on your PC to  
read it.  
VQT3G87  
 
GN  
Dear Customer,  
About the battery pack  
We would like to take this opportunity to thank you for purchasing this Panasonic  
Digital Camera. Please read these Operating Instructions carefully and keep them  
handy for future reference. Please note that the actual controls and components,  
menu items, etc. of your Digital Camera may look somewhat different from those  
shown in the illustrations in these Operating Instructions.  
CAUTION  
Danger of explosion if battery is incorrectly replaced. Replace only with  
the same or equivalent type recommended by the manufacturer.  
Dispose of used batteries according to the manufacturer’s instructions.  
Carefully observe copyright laws.  
• Recording of pre-recorded tapes or discs or other published or broadcast material  
for purposes other than your own private use may infringe copyright laws. Even  
for the purpose of private use, recording of certain material may be restricted.  
• Do not heat or expose to flame.  
• Do not leave the battery(ies) in an automobile exposed to direct  
sunlight for a long period of time with doors and windows closed.  
Information for Your Safety  
Warning  
Risk of fire, explosion and burns. Do not disassemble, heat above  
60 °C or incinerate.  
WARNING:  
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT  
DAMAGE,  
DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE,  
DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED  
WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE  
APPARATUS.  
USE ONLY THE RECOMMENDED ACCESSORIES.  
DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO  
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO  
QUALIFIED SERVICE PERSONNEL.  
IF THE POWER CORD OF THIS EQUIPMENT IS DAMAGED, IT MUST  
BE REPLACED WITH AN ELECTRICALLY APPROVED POWER CORD.  
THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE  
EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.  
Product identification marking  
Product  
Digital camera  
Location  
Bottom  
Bottom  
Battery charger  
2
VQT3G87 (ENG)  
(ENG) VQT3G87  
3
 
About the battery charger  
-If you see this symbol-  
CAUTION!  
Information on Disposal in other  
Countries outside the European Union  
This symbol is only valid in the European  
Union.  
If you wish to discard this product, please  
contact your local authorities or dealer and  
ask for the correct method of disposal.  
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN  
CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS  
WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE  
HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY  
OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.  
DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH  
NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.  
DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED  
CANDLES, ON THE UNIT.  
DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY MANNER.  
• The battery charger is in the standby condition when the AC power supply cord  
is connected. The primary circuit is always “live” as long as the power cord is  
connected to an electrical outlet.  
Cautions for Use  
• When using an AC adaptor, use the AC cable supplied with the AC adaptor.  
• Do not use any other AV cables except the supplied one.  
• Do not use any other USB connection cables except the supplied one.  
• Always use a genuine Panasonic HDMI mini cable (RP-CDHM15/RP-CDHM30:  
optional).  
In the event of abnormal operation (e.g. if the unit emits smoke or an unusual  
smell), immediately stop operating the unit and consult the Panasonic Customer  
Care Centre on 132600.  
Keep this unit as far away as possible from electromagnetic equipment (such  
as microwave ovens, TVs, video games etc.).  
• If you use this unit on top of or near a TV, the pictures and/or sound on this unit  
may be disrupted by electromagnetic wave radiation.  
• Do not use this unit near cell phones because doing so may result in noise  
adversely affecting the pictures and/or sound.  
• Recorded data may be damaged, or pictures may be distorted, by strong  
magnetic fields created by speakers or large motors.  
• Electromagnetic wave radiation generated by microprocessors may adversely  
affect this unit, disturbing the pictures and/or sound.  
• If this unit is adversely affected by electromagnetic equipment and stops  
functioning properly, turn this unit off and remove the battery or disconnect  
AC adaptor (DMW-AC5G; optional). Then reinsert the battery or reconnect AC  
adaptor and turn this unit on.  
Do not use this unit near radio transmitters or high-voltage lines.  
• If you record near radio transmitters or high-voltage lines, the recorded pictures  
and/or sound may be adversely affected.  
4
VQT3G87 (ENG)  
(ENG) VQT3G87  
5
 
Contents  
Standard accessories  
Information for Your Safety .......2  
Check that all the accessories are supplied before using the camera. Part  
numbers are as of January 2011.  
Before use  
Basics  
Battery pack  
DMW-BCG10E  
• Charge the battery  
before use.  
AC cable  
K2CJ29A00002  
Standard accessories ................7 Selecting the Recording  
Names of parts............................8 Mode ..........................................19  
Battery pack is indicated as  
battery pack or battery in the  
text.  
Cursor button ...................................9  
Hand strap  
VFC4297  
Taking pictures with automatic  
Touch operations......................10  
settings  
[Intelligent Auto] Mode.............20  
USB connection cable  
K1HY08YY0017  
Preparations  
AF Tracking....................................21  
Taking motion pictures ............22  
Viewing your pictures  
Battery charger  
DE-A66A  
Charging the battery ................12  
Inserting and removing the card  
AV cable  
K1HY08YY0018  
[Normal Play] ............................23  
Deleting pictures ......................23  
Battery charger is indicated as  
battery charger or charger in  
the text.  
(optional)/the battery................14  
Picture save destination  
(cards and built-in memory) ...........15  
Setting the clock.......................16  
About GPS .....................................17  
Others  
CD-ROM  
VFF0768  
• Software:  
Stylus Pen  
VGQ0C14  
Reading the Operating  
Setting the menu ......................18  
Use it to install the  
software on your PC.  
Operating Instructions  
Instructions (PDF format) ........24  
Specifications...........................26  
• Cards are optional. You can record or play back pictures on the built-in  
memory when you are not using a card.  
• Consult the dealer or your nearest Service Centre if you lose the  
supplied accessories. (You can purchase the accessories separately.)  
• Please dispose of all packaging appropriately.  
This product is licensed under the AVC patent portfolio license for the personal  
and noncommercial use of a consumer to (i) encode video in compliance with  
the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded  
by a consumer engaged in a personal and non-commercial activity and/or was  
obtained from a video provider licensed to provide AVC Video. No license is  
granted or shall be implied for any other use. Additional information may be  
obtained from MPEG LA, LLC.  
• Keep small parts in a safe place out of the reach of children.  
6
VQT3G87 (ENG)  
(ENG) VQT3G87  
7
 
The illustrations and screens in this manual may differ from the actual  
product.  
Names of parts  
Camera ON/OFF switch  
Cursor button  
Shutter button  
Mode dial  
[MENU/SET]  
Up cursor button (▲)  
(menu display/set/finish)  
Exposure Compensation,  
Auto Bracket etc.  
Flash  
Self-timer indicator/AF Assist Lamp  
Left cursor button (◄)  
• Self-timer  
Right cursor button (►)  
• Flash  
Lens barrel  
Lens  
Down cursor button (▼)  
• Macro Mode etc.  
Speaker  
GPS antenna  
Zoom lever  
GPS status  
indicator  
In this manual, the button that is used is indicated by▲▼◄►.  
Microphone  
Hand strap eyelet  
LCD monitor  
Motion picture  
button  
[EXPOSURE] button  
[DISP.] button  
We recommend using the  
supplied hand strap to avoid  
dropping the camera.  
REC/PLAY switch  
[Q.MENU]/[  
/
]
(Delete/Return) button  
Tripod receptacle  
• Ensure that the tripod is stable.  
HDMI socket  
Card/Battery door  
Release lever  
[AV OUT/DIGITAL] socket  
DC coupler cover  
We recommend you use a battery with sufficient battery power or the  
AC adaptor when recording motion pictures.  
If the power supply is cut off due to a power cut or the AC adaptor being  
disconnected, the motion picture being recorded using the AC adaptor  
will not be recorded.  
Always use a genuine Panasonic AC adaptor (DMW-AC5G: optional).  
When using an AC adaptor, ensure that the Panasonic DC coupler  
(DMW-DCC5; optional) and AC adaptor (DMW-AC5G; optional) are  
used.  
8
VQT3G87 (ENG)  
(ENG) VQT3G87  
9
 
Touch operations  
This camera’s touch panel senses pressure that is applied to the screen.  
If the type of sheet to protect LCD screens that are available on the  
market is to be used, observe the precautions that are contained with  
the sheet. (Some types of protective sheets may impair the screen’s  
visual recognition and ease of operation.)  
If the camera is used with a protective sheet available on the market  
attached to its screen or if the screen is not very responsive, touch the  
screen with a little more pressure.  
Touch  
To touch” is to press the touch panel and then pull the finger back  
again.  
If your hand is pressed against the touch panel when holding the  
camera, the touch panel will not work properly.  
Do not press on the LCD monitor with hard pointed tips, such as ball  
point pens.  
Do not press the touch panel with your fingernails.  
Clean the LCD monitor with a soft dry cloth if there are fingerprints or  
other kinds of dirt on it.  
Touching is used to select icons or pictures, among other actions.  
Touch an icon near its centre. If multiple icons are touched simultaneously, the  
camera may not operate normally.  
Stylus pen  
The stylus pen (supplied) comes in handy when doing the kinds of jobs  
that require close or careful operation and your fingertips are too large  
to perform the operations easily.  
Drag  
To drag” is to touch and slide your finger across the touch panel  
surface.  
• Do not use a pen other than the pen supplied.  
• Keep the stylus pen out of the reach of infants and small children.  
• Do not place the stylus pen on the LCD monitor when storing. LCD  
monitor may break when the stylus pen is pressed strongly against  
the LCD monitor.  
Dragging (sliding your finger across the screen) is used to scroll the pictures or  
change the range of the pictures displayed.  
10  
VQT3G87 (ENG)  
(ENG) VQT3G87  
11  
 
Charging the battery  
About batteries that you can use with this unit  
The battery that can be used with this unit is DMW-BCG10E.  
Connect the charger to the electrical outlet  
Charging light  
([CHARGE])  
It has been found that counterfeit battery packs which look very  
similar to the genuine products are made available to purchase  
in some markets. Some of these battery packs are not adequately  
protected with internal protection to meet the requirements of  
appropriate safety standards. There is a possibility that these  
battery packs may lead to fire or explosion. Please be advised  
that we are not liable for any accident or failure occurring as a  
result of use of a counterfeit battery pack. To ensure that safe  
products are used we recommend that a genuine Panasonic  
battery pack is used.  
On: Charging in progress  
(approx. 130 min. if  
fully depleted)  
Off: Charging complete  
Detach the battery after charging is completed  
Recording capacity guidelines (pictures/recording time)  
Use the dedicated charger and battery.  
Number of recordable  
Approx. 260 pictures  
pictures  
The camera has a function for distinguishing batteries which can  
be used safely. The dedicated battery (DMW-BCG10E) supports  
this function. The only batteries suitable for use with this unit  
are genuine Panasonic products and batteries manufactured by  
other companies and certified by Panasonic. (Batteries which do  
not support this function cannot be used.) Panasonic cannot in  
any way guarantee the quality, performance or safety of batteries  
which have been manufactured by other companies and are not  
genuine Panasonic products.  
Recording time  
Playback time  
Approx. 130 min  
Approx. 210 min  
Recording conditions by CIPA standard  
• CIPA is an abbreviation of [Camera & Imaging Products Association].  
• [Program AE] Mode.  
• [GPS Setting] is set to [OFF]  
The battery is not charged when the camera is shipped. Charge  
the battery and set the clock before use.  
Charge the battery with the charger indoors (10 °C - 30 °C).  
Temperature: 23 °C/Humidity: 50 %RH when LCD monitor is on.  
• Using a Panasonic SD Memory Card (32 MB).  
• Using the supplied battery.  
• Starting recording 30 seconds after the camera is turned on. (When the  
Optical Image Stabilizer function is set to [ON].)  
Recording once every 30 seconds with full flash every second recording.  
• Rotating the zoom lever from Tele to Wide or vice versa in every  
recording.  
• Turning the camera off every 10 recordings and leaving it until the  
temperature of the battery decreases.  
Insert the battery terminals and attach  
the battery to the charger  
The number of recordable pictures or available operating time may vary  
according to surrounding environment and usage conditions. Figures may  
be reduced if flash, zoom, or other functions are used frequently, or in  
colder climates.  
Ensure [LUMIX] faces outwards.  
12  
VQT3G87 (ENG)  
(ENG) VQT3G87  
13  
 
Inserting and removing the card  
(optional)/the battery  
Set the camera ON/OFF switch  
to OFF and slide the release  
lever ( ) to [OPEN] before  
opening the lid  
Picture save destination (cards and built-in memory)  
Built-in memory (approx. 18 MB)  
The built-in memory can be used as a temporary storage device when  
the card being used becomes full.  
The access time for the built-in memory may be longer than the access  
time for a card.  
[OPEN] [LOCK]  
Insert the battery and card,  
making sure that their  
orientation is correct  
Battery: Insert all the way firmly until a  
locking sound is heard, and check  
that the lever is hooked over the  
battery.  
Compatible memory cards (optional)  
The following SD standard-based cards  
(Panasonic brand recommended)  
Type of Card  
Capacity  
Notes  
*
SD  
8 MB – 2 GB  
• Using a card of SD speed “Class 4” or above  
is recommended for recording motion pictures  
in [AVCHD].  
Memory Cards  
SDHC  
Memory Cards  
SDXC  
4 GB – 32 GB  
48 GB, 64 GB  
*
Using a card of SD speed “Class 6” or above  
Card: Insert all the way firmly until it clicks.  
is recommended for recording motion pictures  
in “Motion JPEG”.  
Memory Cards  
• Can be used with devices compatible with the  
respective formats.  
Close lid  
Slide to the [LOCK] position.  
• Before using SDXC Memory Cards, check that  
your computer and other devices support this  
type of card.  
• Only the cards listed on the left with the given  
capacities are supported.  
To remove  
To remove battery:  
To remove card:  
move lever in direction of arrow.  
press down in centre.  
*
SD speed class refers to a specification for sustained write speeds.  
Confirm the SD speed by checking the card label or other card related  
materials.  
(Example)  
Lever  
Latest information:  
(This Site is English only.)  
Always use genuine Panasonic batteries (DMW-BCG10E).  
If you use other batteries, we cannot guarantee the quality of this  
product.  
Keep the Memory Card out of reach of children to prevent swallowing.  
Insert the card fully, otherwise it may be damaged.  
14  
VQT3G87 (ENG)  
(ENG) VQT3G87  
15  
 
Setting the clock  
The clock is not set when the camera is shipped.  
When [Please set the home area] is displayed,  
press [MENU/SET]  
Turn on the power ( )  
Press ◄► to set your home  
area and press [MENU/SET]  
The current time and home area are set.  
• [GPS Setting] turns [ON].  
• Turn on power again and check the time  
display.  
Press [MENU/SET] ( ) while the  
message is displayed  
Press ◄► to select the items  
(year, month, day, hour, minute,  
display order or time display  
format), and press ▲▼ to set  
To change the time setting  
Select [Clock Set] from [Rec] or [Setup] menu, perform  
To cancel → Press [  
/
].  
and  
.
Press [MENU/SET]  
Confirm the setting and press [MENU/SET]  
To return to the previous screen, press [  
/
].  
Press ◄ to select [Yes] and press [MENU/SET]  
if automatically correcting time of day using the  
GPS function  
About GPS  
When GPS is used, the camera performs the following functions.  
• Records location name information and the latitude and longitude  
for the positioned location on the recorded pictures  
• Corrects automatically to the current time  
To manually set date and time →select [No].  
When [GPS Setting] is [ON], the GPS function works  
even if the camera’s power is off.  
• Electromagnetic waves from the camera can affect instruments  
and meters. During airplane takeoff and landing or in other  
restricted area, set [GPS Setting] to [OFF] or , then turn the  
camera’s power off.  
• When [GPS Setting] is [ON], power will drain from the battery  
even if the camera’s power is OFF.  
16  
VQT3G87 (ENG)  
(ENG) VQT3G87  
17  
 
Setting the menu  
Selecting the Recording Mode  
Refer to the following procedures to operate the menus.  
Turn on the power ( )  
Example: Setting [AF Mode] from  
to  
in the [Program AE] Mode  
Slide the [REC/PLAY] switch  
( ) to  
Press [MENU/SET] to display the menu  
Switching to the [Rec] menu  
Switch the mode by rotating the  
mode dial ( )  
Select [Rec], and press [MENU/SET].  
• The menu type can also be selected by  
touch operations.  
[Intelligent Auto] Mode  
Take pictures with automatic settings.  
[Program AE] Mode  
The subjects are recorded using your own settings.  
[Aperture-Priority] Mode  
Press ▲▼ to select [AF Mode]  
and then press [MENU/SET]  
• Depending on the item, its setting may not  
appear or it may be displayed in a different  
way.  
The shutter speed is automatically determined by the aperture value you  
set.  
[Shutter-Priority] Mode  
The aperture value is automatically determined by the shutter speed you  
set.  
Press ▲▼ to select  
press [MENU/SET] to set  
and then  
[Manual Exposure] Mode  
The exposure is adjusted by the aperture value and the shutter speed which  
are manually adjusted.  
Press [ ] several times to  
/
[Custom] Mode  
Use this mode to take pictures with previously registered setting.  
close the menu  
[3D Photo Mode]  
Record 3D still pictures.  
[Scene Mode]  
Take pictures according to the scene.  
[My Scene Mode]  
Take pictures in frequently-used Scene Modes.  
18  
VQT3G87 (ENG)  
(ENG) VQT3G87  
19  
 
[Intelligent Auto] Mode  
Recording Mode:  
Taking pictures with automatic settings  
Optimum settings are made automatically from information such as  
“face,” “movement,” “brightness,” and “distance” just by pointing the  
camera at the subject, meaning that clear pictures can be taken without  
the need to make settings manually.  
Automatic Scene Detection  
Camera identifies the scene when pointed at the subject, and makes  
optimum settings automatically. The type of scene detected is indicated  
by a blue icon for two seconds.  
People are detected.  
Baby is detected.  
Shutter button  
Turn on the power ( )  
Scenery is detected.  
Slide the [REC/PLAY] switch  
( ) to  
People and night scenery are detected.  
(Only when  
is selected)  
Night scenery is detected.  
Set the mode dial ( ) to  
Recognises night scenes without a tripod.  
A close-up shot is detected.  
A sunset is detected.  
Reads subject movement to avoid blurring when the scene does not  
correspond to any of the above.  
If the camera automatically identifies the scene and determines  
that people appear as subjects in the picture (  
Detection is activated, and the focus and exposure are adjusted for the  
recognised faces.  
,
,
), Face  
Take pictures  
AF Tracking  
Press halfway  
(press lightly and focus)  
Press fully  
(press the button  
all the way to record)  
This function enables the camera to continue to focus on the subject and  
adjust the exposure of the subject even when the subject is moving.  
• If jitter becomes noticeable, use both hands, keep your arms close  
to your body, and stand with your feet at shoulder width.  
Perform these operations with the touch shutter function released.  
Focus display (  
)
Touch the subject  
• When switching to lock on to another subject  
Touch the other subject.  
(In focus: lit / Not in focus: flashing)  
• The AF area ( ) is displayed around  
the subject’s face by the Face Detection  
function. In other cases, it is displayed at  
the point on the subject which is in focus.  
• Focus: Max. W: 3 cm/  
To release AF tracking → Touch  
.
Max. T: 1 m and above  
(7 × to 11 × is 2 m to  
)
20  
VQT3G87 (ENG)  
(ENG) VQT3G87  
21  
 
Taking motion pictures  
Viewing your pictures[Normal Play]  
Recording Mode:  
Playback Mode:  
This records motion pictures with audio. Zoom can also be used during  
recording.  
Slide the [REC/PLAY] switch  
( ) to  
Drag your finger across the  
screen, and select the picture to  
be played back  
Slide the [REC/PLAY] switch to  
Start recording  
Press  
End recording  
Elapsed recording time  
Press  
To play back a motion picture, select an image with ◄ or ►, and then  
press ▲ to start playback.  
You can print pictures by connecting a camera to your computer or  
printer, or by giving an SD card to a shop assistant at a photo shop.  
Remaining recording time  
(approx.)  
Deleting pictures  
Playback Mode:  
Immediately release the motion picture button after pressing it all the  
way.  
When there is no space left to store the motion picture, recording  
automatically ends.  
An AVCHD motion picture can be recorded continuously for up to  
29 minutes 59 seconds when [GFS] or [FSH] is set.  
Also, a maximum of approx. 2 GB of continuous motion picture can  
be recorded in Motion JPEG format. (Even if there is more than 2 GB  
of available space on the card, the available recording time will be  
calculated up to a maximum of 2 GB.)  
Deleted pictures cannot be recovered.  
Press [  
/
] ( ) to delete the  
displayed picture  
Press ◄ to select [Yes] and  
then press [MENU/SET] ( )  
If [Rec Quality] is set to [GFS] or [FSH], and if the surrounding  
temperature is high, or motion picture is recorded continuously,  
is displayed, and the recording may be stopped halfway  
through.  
22  
VQT3G87 (ENG)  
(ENG) VQT3G87  
23  
 
Reading the Operating Instructions  
(PDF format)  
More detailed instructions on the operation of this camera are contained  
in “Operating Instructions for advanced features (PDF format)” in the  
supplied CD-ROM. Install it on your PC to read it.  
When the Operating Instructions (PDF format) will not open  
You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0  
or later to browse or print the Operating Instructions (PDF format).  
Insert the CD-ROM containing the Operating Instructions (supplied),  
click  
and then follow the messages on the screen to install.  
For Windows  
Compatible OS: Windows 2000 SP4 / Windows XP SP3 / Windows  
Vista SP2 / Windows 7  
You can download and install a version of Adobe Reader that you can  
use with your OS from the following Web Site.  
Turn the PC on and insert the CD-ROM containing  
the Operating Instructions (supplied)  
Click the “Operating Instructions”  
Select the desired language and then click  
“Operating Instructions” to install  
To uninstall the Operating Instructions (PDF format)  
Delete the PDF file from the “Program Files\Panasonic\Lumix\” folder.  
• When the contents in the Program Files folder cannot be displayed,  
click the “Show the contents of this folder” to display them.  
For Macintosh  
Turn the PC on and insert the CD-ROM containing  
the Operating Instructions (supplied)  
Open the “Manual” folder in the CD-ROM and then  
copy the PDF file with the desired language inside  
the folder  
To return to the install menu.  
See next page.  
Double click the PDF file to open it  
Double click the “Operating Instructions” shortcut  
icon on the desktop  
24  
VQT3G87 (ENG)  
(ENG) VQT3G87  
25  
 
Specifications  
Digital Camera: Information for your safety  
Minimum  
Illumination  
Approx. 14 lx (when i-Low light is used, the shutter speed  
is 1/50th of a second)  
Power Source  
DC 5.1 V  
Shutter speed  
Exposure (AE)  
60 to 1/4000 th  
Power  
When recording: 1.4 W  
[Starry Sky] Mode: 15 seconds, 30 seconds, 60 seconds  
Consumption  
When playing back: 0.9 W  
Programme AE (P)/Aperture-priority AE (A)/  
Shutter-priority AE (S)/Manual exposure (M)  
Exposure Compensation  
Camera effective  
pixels  
14,100,000 pixels  
Image sensor  
1/2.33” MOS sensor,  
total pixel number 15,100,000 pixels  
Primary colour filter  
(1/3 EV Step, -2 EV to +2 EV)  
Metering Mode  
LCD monitor  
Multiple/Centre weighted/Spot  
3.0” TFT LCD (4:3) (Approx. 460,800 dots)  
(field of view ratio about 100 %)/Touch panel  
Lens  
Optical 16 x zoom  
f=4.3 mm to 68.8 mm  
(35 mm film camera equivalent: 24 mm to 384 mm)/  
F3.3 (Max. W) to F5.9 (Max. T)  
Flash  
Flash range: (ISO AUTO) Approx. 60 cm to 5.0 m (Wide)  
Microphone  
Speaker  
Stereo  
Digital Zoom  
Max. 4 x  
Monaural  
Extra optical zoom Max. 33.8 x  
(When the picture size is set to 3 million pixels [3M] or less.)  
Recording media  
Built-in Memory (Approx. 18 MB)/SD Memory Card/  
SDHC Memory Card/SDXC Memory Card  
Focus range  
P/A/S/M  
Recording file  
format  
50 cm (Wide)/2 m (Tele) to  
3 cm (Wide)/1 m (Tele) to  
Macro/  
Intelligent Auto/  
Motion picture  
Still picture  
JPEG (based on Design rule for Camera File system,  
based on Exif 2.3 standard/DPOF corresponding)/MPO  
(7 × to 11 × is 2 m to  
)
Motion pictures AVCHD/QuickTime Motion JPEG  
Interface  
Digital  
Analogue video NTSC/PAL Composite (Switched by menu)  
Scene Mode  
Shutter system  
Burst recording  
There may be difference in above settings.  
Electronic shutter + Mechanical shutter  
USB 2.0 (High Speed)  
Burst speed  
(Burst number/maximum recordable pixels)  
Audio  
Audio line output (Monaural)  
For mechanical  
shutter  
Approx. 2 frames/sec (Max. 100 frames/14 M),  
Approx. 5 frames/sec (Max. 100 frames/14 M),  
Approx. 10 frames/sec (Max. 15 frames/14 M)  
Terminal  
HDMI: MiniHDMI TypeC  
AV OUT/DIGITAL: Dedicated jack (8 pin)  
For electronic  
shutter  
40 frames/sec (Max. 50 frames/5 M),  
60 frames/sec (Max. 60 frames/3.5 M)  
Dimensions  
Approx. 104.9 mm (W) x 57.6 mm (H) x 33.4 mm (D)  
(excluding the projection part)  
During motion  
picture  
recording  
Approx. 2 frames/sec (Max. 40 frames/3.5 M),  
Approx. 5 frames/sec (Max. 40 frames/3.5 M),  
Approx. 10 frames/sec (Max. 40 frames/3.5 M)  
26  
VQT3G87 (ENG)  
(ENG) VQT3G87  
27  
 
Specifications(Continued)  
Battery charger  
(Panasonic DE-A66A): Information for your safety  
Mass  
With card and battery: Approx. 219  
Excluding card and battery: Approx. 197  
Input  
110 V to 240 V ~ 50/60Hz, 0.2 A  
4.2 V 0.65 A  
Operating  
0 °C to 40 °C  
temperature  
Output  
Operating humidity 10 %RH to 80 %RH  
GPS Reception frequency: 1575.42 MHz (C/A code)  
Battery Pack (lithium-ion)  
(Panasonic DMW-BCG10E): Information for your safety  
Geographical coordinate system: WGS84  
Voltage/capacity 3.6 V/895 mAh  
28  
VQT3G87 (ENG)  
(ENG) VQT3G87  
29  
 
MEMO  
MEMO  
30  
VQT3G87 (ENG)  
(ENG) VQT3G87  
31  
 

Multiquip Drums MTR 35HS User Manual
Multiquip Pole Saw MP2050E1 User Manual
NEC Computer Monitor MultiSync EA224WMi User Manual
NEC Flat Panel Television NLT 20 User Manual
NewAir Air Conditioner AC14000E User Manual
Nikon Cell Phone S9900 User Manual
Omron Healthcare Blood Pressure Monitor HEM 757 User Manual
Optoma Technology Projector EP725 User Manual
Panasonic All in One Printer DP 4530 User Manual
Panasonic Conference Phone KXTS840B User Manual