Nokia Headphones BH 604 User Manual

Nokia Bluetooth Stereo Headset  
BH-604 User Guide  
9203660  
Issue 2 EN  
 
Contents  
Disconnect the headset.................... 9  
Reconnect the headset..................... 9  
1. Introduction ......................... 4  
Bluetooth wireless technology.......... 4  
3. Basic use ............................. 10  
Place the headset over the head..... 10  
Adjust the volume............................... 10  
Call handling......................................... 10  
Listen to music..................................... 11  
Clear the settings or  
2. Get started............................ 6  
Overview .................................................. 6  
Chargers................................................... 6  
Charge the battery................................ 6  
Switch the headset on or off ............. 7  
Switch on ............................................. 7  
Switch off............................................. 7  
Pair and connect the headset............ 8  
Pair and connect the headset  
reset the headset................................. 11  
4. Battery information ........... 12  
Care and maintenance ........... 13  
with a mobile phone that has  
a music player feature...................... 8  
Pair and connect the headset  
with a music player........................... 8  
3
 
I n t r o d u c t i o n  
1. Introduction  
With the Nokia Bluetooth Stereo Headset BH-604 you can listen to  
music from your compatible music player and make and receive  
hands-free calls using your mobile phone. The music player can be the  
music player feature of your mobile phone or a separate music device.  
You can use the headset with compatible devices that support  
Bluetooth wireless technology.  
Read this user guide carefully before using the headset. Also read the  
user guide for your mobile phone, which provides important safety and  
maintenance information, and the user guide for your music device.  
Keep the headset and its accessories out of reach of small children.  
Bluetooth wireless technology  
Bluetooth wireless technology allows  
you to connect compatible devices  
without cables. A Bluetooth  
connection does not require that the  
headset and the other device be in line  
of sight, but the maximum distance  
between the devices is 10 meters  
(30 feet). The closer the devices are to  
each other, the better is the  
performance. The optimal operating  
range is shown in dark grey in the  
picture. The connection is subject to interference from distance and  
obstructions (shown in light grey) or other electronic devices.  
The headset is compliant with Bluetooth Specification 2.0 + EDR  
supporting the following profiles: Headset Profile 1.1, Hands-Free  
Profile 1.5, Advanced Audio Distribution Profile (A2DP) 1.0, and Audio  
Video Remote Control Profile 1.0. Check with the manufacturers of  
other devices to determine their compatibility with this device.  
4
 
   
I n t r o d u c t i o n  
There may be restrictions on using Bluetooth technology in some  
locations. Check with your local authorities or service provider.  
5
 
G e t s t a r t e d  
2. Get started  
Overview  
The headset contains the following parts:  
• Fast forward key (1)  
• Microphone (2)  
• Volume key (3)  
• Multifunction key (4)  
• Play/pause key (5)  
• Rewind key (6)  
• Indicator light (7)  
• Charger connector (8)  
Before you can start using the headset, you must charge the battery and  
pair the headset with a compatible mobile phone.  
Parts of the headset are magnetic. Metallic materials may be attracted to the  
headset. Do not place credit cards or other magnetic storage media near the  
headset, because information stored on them may be erased.  
Chargers  
Check the model number of any charger before using it with this headset. The  
headset is intended for use with the AC-4, AC-5, and DC-4 chargers.  
Warning: Use chargers approved by Nokia for use with this particular  
enhancement. The use of any other types may invalidate any approval  
or warranty, and may be dangerous.  
When you disconnect the power cord of any enhancement, grasp and pull the  
plug, not the cord.  
Charge the battery  
The headset has an internal, nonremovable, rechargeable battery. Do  
not attempt to remove the battery from the headset, as you may  
damage the headset.  
6
 
       
G e t s t a r t e d  
1. Connect the charger to a wall outlet.  
2. Connect the charger cable to the charger connector. The indicator  
light is red while charging. It may take a while before charging starts.  
If charging does not start, disconnect the charger, plug it in again,  
and retry.  
Charging the battery fully takes less than 1 hour and 15 minutes.  
3. When the battery is fully charged, the indicator light turns green.  
Disconnect the charger from the headset and the wall outlet.  
The fully charged battery has power for up to 18 hours of talk time, up to  
2 weeks of standby time, or up to 19 hours of music playing time.  
However, the times may vary with different compatible Bluetooth  
devices, usage settings, usage styles, and environments.  
When battery power is low, the headset beeps at regular intervals, and  
the indicator light slowly flashes red. Recharge the battery.  
Switch the headset on or off  
Switch on  
To switch on, press and hold the multifunction key for about 2 seconds.  
The headset beeps, and the green indicator light is briefly displayed.  
When the headset tries to connect to the paired mobile phone or music  
player that you have last used with it, the indicator light slowly flashes  
green. When the headset is connected to a paired device and is ready for  
use, the indicator light slowly flashes blue. If the headset has not been  
paired with a device, it automatically enters the pairing mode (see “Pair  
and connect the headset,” p. 8).  
If you connect the headset to a device but do not use it for a while,  
switch off the headset to save power.  
Switch off  
To switch off, press and hold the multifunction key for about 5 seconds.  
The headset beeps, and the red indicator light is briefly displayed.  
7
 
     
G e t s t a r t e d  
Pair and connect the headset  
Pair and connect the headset with a mobile phone that  
has a music player feature  
If your phone supports the A2DP Bluetooth profile and has a music  
player feature, you can use the phone to make and receive calls and to  
play music with the headset.  
1. Ensure that your phone is switched on.  
2. If the headset has not been previously paired with a device, switch  
on the headset. The headset enters the pairing mode, and the  
indicator light starts to flash blue quickly.  
If the headset has been previously paired with another device, switch  
off the headset, and press and hold the multifunction key until the  
indicator light starts to flash blue quickly.  
3. Activate the Bluetooth feature on the phone, and set it to search for  
Bluetooth devices. See the user guide of your phone for instructions.  
4. Select the headset from the list of found devices.  
5. Enter the passcode 0000 to pair and connect the headset to your  
phone. In some phones, you may need to make the connection  
separately after pairing. You only need to pair the headset with your  
phone once.  
If pairing is successful, the headset appears in the menu of the mobile  
phone where you can view the currently paired Bluetooth devices.  
When the headset is connected with your mobile phone and ready for  
use, the indicator light of the headset slowly flashes blue.  
Pair and connect the headset with a music player  
If your phone does not support the A2DP Bluetooth profile, you can  
separately pair the headset with the phone and a music player that  
supports this Bluetooth profile.  
If you have paired and connected the headset with your phone,  
disconnect the headset from it before pairing the headset with a music  
player.  
8
 
     
G e t s t a r t e d  
To pair the headset with a music player, follow the instructions in “Pair  
and connect the headset with a mobile phone that has a music player  
feature,” p. 8. If your music player does not have a keypad, it may use the  
Bluetooth passcode 0000 by default. If this is not the case, see the user  
guide of your music player to change the default Bluetooth passcode to  
0000.  
If pairing is successful and the headset is connected with your music  
player, the indicator light of the headset slowly flashes blue.  
Disconnect the headset  
To disconnect the headset from your device, switch off the headset, or  
disconnect it in the Bluetooth menu of your device.  
You do not need to delete pairing with the headset to disconnect it.  
Reconnect the headset  
To connect the headset to the phone or music player that you have last  
used with it, switch on the headset, or make the connection in the  
Bluetooth menu of your device.  
In your device, you may be able to allow the headset to connect to it  
automatically when the headset is switched on. To do this in Nokia  
devices, change your paired device settings in the Bluetooth menu.  
9
 
   
B a s i c u s e  
3. Basic use  
Place the headset over the head  
Place the headset over your head so that the speaker pads rest  
comfortably on your ears.  
Place the pad indicated with L on the left ear and the pad with R on the  
right ear. Adjust the headband length for the best fit.  
Warning: When using the headset your ability to hear outside sounds  
may be affected. Do not use the headset where it can endanger your  
safety.  
Adjust the volume  
To adjust the headset volume, slide the volume key forward to increase  
or backward to decrease the volume during a call or while listening to  
music.  
Call handling  
To make a call, use your mobile phone in the normal way when the  
headset is connected to it.  
If your phone supports redialing with the headset, press the  
multifunction key twice quickly when no call is in progress.  
If your phone supports voice dialing with the headset, press and hold the  
multifunction key for about 2 seconds until the phone starts voice  
dialing, and proceed as instructed in the user guide of the phone. Voice  
dialing cannot be used during a call.  
To answer a call, press the multifunction key, or use the keys of the  
phone. To reject the call, press the multifunction key twice quickly.  
To end a call, press the multifunction key, or use the keys of the phone.  
To mute or unmute the microphone during a call, press the play/pause  
key.  
10  
 
       
B a s i c u s e  
To switch the call from the headset to a connected phone, press and  
hold the play/pause key for about 2 seconds. To switch the call back to  
the headset, press the multifunction key once.  
Listen to music  
To listen to music, connect the headset to a compatible music player  
such as a mobile phone with a music player feature or other music  
device. The music player must support the A2DP Bluetooth profile.  
When the headset is connected to a phone but not to a separate music  
device, the headset can only be used to make and receive calls if the  
phone does not have a music player feature.  
The available music functions depend on your music player.  
If you receive or make a call while listening to music, the music is  
paused until you end the call.  
Warning: Listen to music at a moderate level. Continuous exposure to  
high volume may damage your hearing.  
To play a track, select it in the music player, and press the play/pause  
key.  
To pause or resume playing, press the play/pause key. To stop playing,  
press and hold the play/pause key for about 2 seconds.  
To select the next track, press the fast forward key. To select the  
previous track, press the rewind key. To scroll through the current track  
quickly during playback, press and hold either key.  
Clear the settings or reset the headset  
To clear the pairing and volume settings, switch off the headset, and  
press and hold the multifunction key and slide the volume key forward  
until the indicator light alternates red, green, and blue three times.  
To reset the headset if it stops functioning, although it is charged, plug  
the charger into the headset, and press and hold the multifunction key  
and slide the volume key forward. The reset does not clear the headset  
settings.  
11  
 
   
B a t t e r y i n f o r m a t i o n  
4. Battery information  
Your device is powered by a rechargeable battery. The battery can be charged and  
discharged hundreds of times, but it will eventually wear out. Recharge your  
battery only with Nokia approved chargers designated for this device.  
Unplug the charger from the electrical plug and the device when not in use. Do  
not leave a fully charged battery connected to a charger, since overcharging may  
shorten its lifetime. If left unused, a fully charged battery will lose its charge over  
time.  
Never use any charger that is damaged.  
Leaving the device in hot or cold places, such as in a closed car in summer or  
winter conditions, will reduce the capacity and lifetime of the battery. Always try  
to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot  
or cold battery may not work temporarily, even when the battery is fully charged.  
Battery performance is particularly limited in temperatures well below freezing.  
Do not dispose of batteries in a fire as they may explode. Batteries may also  
explode if damaged.  
12  
 
 
C a r e a n d m a i n t e n a n c e  
Care and maintenance  
Your device is a product of superior design and craftsmanship and should be  
treated with care. The following suggestions will help you protect your warranty  
coverage.  
Keep the device dry. Precipitation, humidity, and all types of liquids or  
moisture can contain minerals that will corrode electronic circuits. If your  
device does get wet, allow it to dry completely.  
Do not use or store the device in dusty, dirty areas. Its moving parts and  
electronic components can be damaged.  
Do not store the device in hot areas. High temperatures can shorten the life of  
electronic devices, damage batteries, and warp or melt certain plastics.  
Do not store the device in cold areas. When the device returns to its normal  
temperature, moisture can form inside the device and damage electronic  
circuit boards.  
Do not attempt to open the device.  
Do not drop, knock, or shake the device. Rough handling can break internal  
circuit boards and fine mechanics.  
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean  
the device.  
Do not paint the device. Paint can clog the moving parts and prevent proper  
operation.  
All of the above suggestions apply equally to your device, battery, charger, or any  
enhancement. If any device is not working properly, take it to the nearest  
authorized service facility for service.  
Disposal  
The crossed-out wheeled-bin symbol on your product, literature, or  
packaging reminds you that in the European Union all electrical and  
electronic products, batteries, and accumulators must be taken to  
separate collection at the end of their working life. Do not dispose of these  
products as unsorted municipal waste.  
Return the products to collection to prevent possible harm to the environment or  
human health from uncontrolled waste disposal and to promote the sustainable  
reuse of material resources. Collection information is available from the product  
retailer, local waste authorities, national producer responsibility organizations,  
13  
 
 
C a r e a n d m a i n t e n a n c e  
or your local Nokia representative. For more information, see product  
14  
 

Miele Food Warmer ESW4082 14 User Manual
Miele Ventilation Hood DA 2210 User Manual
Miele Ventilation Hood DA 6590 D User Manual
Milwaukee DVD Player 2320 20 User Manual
NEC Laptop MobilePro 880 User Manual
Network Technologies Switch UNIMUX USBV 4 User Manual
New Holland Tiller 105A User Manual
Nortel Networks Switch 8691SF User Manual
Nvidia Computer Hardware GeForce Series User Manual
Omega Engineering Thermometer HH64A User Manual