™
HM-5U Headmic
User Guide
Congratulations on purchasing the NADY HM-5U unidirectional condenser
headset microphone. Optimally designed for singing and speaking applications,
even in noisy environments. Its small, lightweight design makes it ideal for hands-free
use with minimum visibility. Perfect for singer-musicians (drummers, keyboardists),
vocal/dance performers, DJ’s, television announcers, public speakers, and
aerobics instructors.
Standard Items Supplied
•
•
HM-5U unidirectional mic with small foam windscreen
User guide and Warranty card
Optional Accessories
•
XM-10 — Mini-XLR to XLR phantom power adapter (converts 48V phantom power
to 5V-10V DC)
•
HM-CC1 — Plastic headmic carrying case
Features
Specifications:
Element: Condenser
Polar pattern: Unidirectional cardioid Frequency
Response: 20Hz~18KHz Sensitivity: -46dB ±3dB
Output impedance: 1K Ω ±5%
SPL max: 135dB
Power Supply: 1.5-12V DC
Capsule: 5x8mm
Cable: 1.5mm dia, 1M (40”)
Weight: 0.9 oz. (25.5g)
•
•
•
•
•
•
•
Full-frequency, unidirectional electret condenser mic
Warm, transparent audio and maximum feedback rejection
Durable, thin metal frame easily molded to any user
Ergonomic design and comfortable fit
Tiny 5 x 8 mm lightweight capsule for hours of comfortable use
Extendable, fully adjustable boom for optimum mic capsule placement
Available with mini-XLR, 3.5mm phono plug (fits most Nady wireless bodypack
transmitters) or with standard XLR adapter for all wired and wireless applications
Output connector: 3.5mm mini-locking plug or
3pin mini-XLR connector
Mini-XLR Wiring: GND = Pin 1, Hot (+) = Pin 3 -->
2K Ω -- > Pin 2
3.5mm Plug Wiring: GND = Sleeve, Hot (+) =
Tip Foam windscreen and extra boom assembly
included
Use & Care
The headset’s arch fits around the back of the head just above the neck. The tip
of the supporting arches rests on the temple just in front of the ear providing the
necessary stability during use. The mic boom descends from the ear on the left side.
Specifications and design subject to change for
improvement purposes without prior notice.
Carefully loosen the boom by unscrewing the assembly one-quarter turn. Place the
microphone capsule close to the mouth to a favorable audio position. Tighten the
boom assembly. Bend the boom and headset slightly for optimum fit.
Frequency Response & Polar Pattern:
Connect the Mini-XLR or 3.5mm plug of the microphone cable to the input jack of
the bodypack transmitter or XM-10 phantom power adapter. When using a phantom
power adapter, connect it to the microphone input of an audio preamp that provides
phantom power.
The entire HM-5U assembly has been moisture-proofed to guard against
deterioration during use. After use in a high moisture application such as aerobics or
a stage performance, remove the foam screen, wipe the headset with a dry soft cloth
and permit it to air-dry. Do not store the unit in a closed space (e.g., a plastic bag)
until all moisture has evaporated, and avoid conditions of extremely high humidity.
This will help maintain the HM-5U’s excellent performance. While the HM-5U is not
unusually sensitive to the outside environment, extremes in temperature can be
harmful. Avoid, for example, leaving the microphone in direct sunlight for long periods
of time.
-40
-50
-60
-70
-80
-90
-100
-110
-120
50
100
200
500
1k
2k
5k
10k
20k
[Hz]
NADY SYSTEMS, Inc.
Service For Your Nady Audio Product (U.S.) Should your NADY AUDIO product require
service, please contact the Nady Service Department via telephone at (510) 652-2411, or e-mail
in your country through the dealer from whom you purchased this product.
6701 Shellmound Street • Emeryville, CA 94608
Phone: 510.652.2411 • Fax: 510.652.5075
|