GS108PE IG_21Sept2012.fm Page 1 Friday, September 21, 2012 12:13 PM
Installation Guide
ProSafe Plus 8-Port Gigabit Switch
with 4-Port PoE GS108PE
Step 1. Connect equipment
Step 2. Connect power
Step 3. Check status
Internet
Computer
Server
Port LEDs
Power LED
PoE LEDs
1000 Mbps link
(both LEDs)
On
PoE in use
PoE not provided
(slow blinking)
100 Mbps link
(left LED)
Off
Optional
modem
10 Mbps link
(right LED)
PoE Max. LED
PoE halted
(fast blinking)
Less than 7W of PoE
power is available
Activity (blinking)
No link (off)
PoE MAX LED was
active in the previous
2 minutes (blinking)
No PoE use (off)
Optional router
GS108PE
PoE ports are
working normally (off)
|