PARTS MANUAL
MODEL QP-301TY
MODEL QP-301TA
TRASH PUMPS
(YANMAR L60AEP/ROBIN EH25 GASOLINE ENGINES)
Revision #0 (09/08/10)
To find the latest revision of this
publication, visit our website at:
THIS MANUAL MUST ACCOMPANYTHE EQUIPMENT AT ALLTIMES.
TABLE OF CONTENTS
COMPONENT DRAWINGS
QP-301TY/QP301TA
Proposition 65 Warning ............................................. 2
Table of Contents ...................................................... 3
Parts Ordering Procedures ....................................... 4
Explanation of Codes in Remarks Column ............... 6
Suggested Spare Parts ............................................. 7
Pump Assembly ................................................... 8-11
Terms and Condition of Sale
—
Parts ...................... 12
NOTICE
Specification and part number are subject to change
without notice.
QP-301TY/QP-301TA TRASH PUMP — PARTS MANUAL— REV. 0 (09/08/10) — PAGE 3
PARTS ORDERING PROCEDURES
Ordering parts has never been easier!
Choose from three easy options:
Effective:
January 1st, 2006
Best Deal!
Order via Internet (Dealers Only):
Order parts on-line using Multiquip’s SmartEquip website!
If you have an MQ Account, to obtain a Username
and Password, E-mail us at: parts@multiquip.
com.
N View Parts Diagrams
N Order Parts
N Print Specification Information
To obtain an MQ Account, contact your
District Sales Manager for more information.
Use the internet and qualify for a 5% Discount
on Standard orders for all orders which include
complete part numbers.*
to log in and save!
Order Parts
Note: Discounts Are Subject To Change
Fax your order in and qualify for a 2% Discount
on Standard orders for all orders which include
complete part numbers.*
Order via Fax (Dealers Only):
All customers are welcome to order parts via Fax.
Domestic (US) Customers dial:
1-800-6-PARTS-7 (800-672-7877)
Note: Discounts Are Subject To Change
Domestic (US) Dealers Call:
Order via Phone:
1-800-427-1244
Non-Dealer Customers:
International Customers should contact
their local Multiquip Representatives for
Parts Ordering information.
Contact your local Multiquip Dealer for
parts or call 800-427-1244 for help in
locating a dealer near you.
When ordering parts, please supply:
R
Dealer Account Number
R
Specify Preferred Method of Shipment:
R
R
R
R
R
Dealer Name and Address
ꢀ UPS/Fed Ex
ꢀ DHL
ꢀ Truck
N
N
Priority One
Ground
Shipping Address (if different than billing address)
Return Fax Number
N Next Day
Second/Third Day
Applicable Model Number
N
Quantity, Part Number and Description of Each Part
NOTICE
All orders are treated as Standard Orders and will
ship the same day if received prior to 3PM PST.
WE ACCEPT ALL MAJOR CREDIT CARDS!
PAGE 4 — QP-301TY/ QP-301TA TRASH PUMP — PARTS MANUAL — REV. #0 (09/08/10)
NOTE PAGE
QP-301TY/QP-301TA TRASH PUMP — PARTS MANUAL— REV. 0 (09/08/10) — PAGE 5
QP-301TY/QP-301TA — EXPLANATION OF CODE IN REMARKS COLUMN
The following section explains the different symbols and
remarks used in the Parts section of this manual. Use the
help numbers found on the back page of the manual if there
are any questions.
QTY. Column
Numbers Used — Item quantity can be indicated by a
number, a blank entry, or A/R.
A/R (As Required) is generally used for hoses or other
parts that are sold in bulk and cut to length.
NOTICE
The contents and part numbers listed in the parts
section are subject to change without notice.Multiquip
does not guarantee the availability of the parts listed.
A blank entry generally indicates that the item is not sold
separately.Other entries will be clarified in the“Remarks”
Column.
SAMPLE PARTS LIST
REMARKS Column
NO. PART NO. PART NAME
QTY. REMARKS
Some of the most common notes found in the “Remarks”
Column are listed below. Other additional notes needed
to describe the item can also be shown.
1
2%
12345
BOLT......................1 .....INCLUDES ITEMS W/%
WASHER, 1/4 IN............NOT SOLD SEPARATELY
WASHER, 3/8 IN....1 .....MQ-45T ONLY
2% 12347
3
4
12348
12349
HOSE ..................A/R ...MAKE LOCALLY
BEARING ..............1 .....S/N 2345B AND ABOVE
Assembly/Kit — All items on the parts list with the
same unique symbol will be included when this item is
purchased.
NO. Column
Indicated by:
Unique Symbols — All items with same unique
symbol
“INCLUDES ITEMS W/(unique symbol)”
(@, #, +, %, or >) in the number column belong to the
same assembly or kit, which is indicated by a note in the
“Remarks” column.
Serial Number Break — Used to list an effective serial
number range where a particular part is used.
Indicated by:
Duplicate Item Numbers — Duplicate numbers indicate
multiple part numbers, which are in effect for the same
general item, such as different size saw blade guards in
use or a part that has been updated on newer versions
of the same machine.
“S/N XXXXX AND BELOW”
“S/N XXXX AND ABOVE”
“S/N XXXX TO S/N XXX”
Specific Model Number Use — Indicates that the part
is used only with the specific model number or model
number variant listed. It can also be used to show a
part is NOT used on a specific model or model number
variant.
NOTICE
When ordering a part that has more than one item
number listed, check the remarks column for help in
determining the proper part to order.
Indicated by:
“XXXXX ONLY”
“NOT USED ON XXXX”
PART NO. Column
Numbers Used — Part numbers can be indicated by a
number, a blank entry, or TBD.
“Make/Obtain Locally” — Indicates that the part can
be purchased at any hardware shop or made out of
available items.Examples include battery cables, shims,
and certain washers and nuts.
TBD (To Be Determined) is generally used to show a
part that has not been assigned a formal part number
at the time of publication.
“Not Sold Separately”— Indicates that an item cannot
be purchased as a separate item and is either part of an
assembly/kit that can be purchased, or is not available
for sale through Multiquip.
A blank entry generally indicates that the item is not sold
separately or is not sold by Multiquip. Other entries will
be clarified in the “Remarks” Column.
PAGE 6 — QP-301TY/ QP-301TA TRASH PUMP — PARTS MANUAL — REV. #0 (09/08/10)
QP-301TY/QP-301TA — SUGGESTED SPARE PARTS
QP-301TY/QP-301TA, TRASH PUMPSWITHYANMAR L60AEDP/ROBIN
EH25 GASOLINE ENGINES
1 to 3 units
QTY.
P/N
DESCRIPTION
1 .......... 1343040030 ......... IMPELLER
1 .......... 0631211100 ......... FLOODING CAP
1 .......... 0806123530 ......... MECHANICAL SEAL
1 .......... 0811883056 ......... MECHANICAL SEAL SLEEVE
1 .......... 0489352400 ......... O-RING DRAIN COVER
1 .......... 0489353970 ......... O-RING CASING (QP-301TY)
1 .......... 0489354020 ......... O-RING CASING (QP-301TA)
1 .......... 0481310250 ......... O-RING MECHANICAL SEAL SLEEVE
1 .......... 0852834525 ......... ADJUST LINER DIA. 45 X DIA. 25 T0.3
1 .......... 0852854525 ......... ADJUST LINER DIA. 45 X DIA. 25 T0.5
NOTICE
Part number on this Suggested Spare Parts List may super
cede/replace the P/N shown in the text pages of this book.
QP-301TY/QP-301TA TRASH PUMP — PARTS MANUAL— REV. 0 (09/08/10) — PAGE 7
QP-301TY/QP-301TA — PUMP ASSY.
PAGE 8 — QP-301TY/ QP-301TA TRASH PUMP — PARTS MANUAL — REV. #0 (09/08/10)
QP-301TY/QP-301TA — PUMP ASSY.
NO.
1
1
2
3
4
5
6
7
PART NO.
PART NAME
QTY.
REMARKS
L60AEDP
ENGINE, YANMAR L60 .......................................1 ............. QP301TY
ENGINE, ROBIN EH25 .......................................1 ............. QP301TA
EH252YD1112
1343100010
1317100020
1343100160
1268100170
1247100250
1343040030
1317000130
1247000200
1247000190
1247200270
1247220280
0641400430
0641400520
0790433030
2345214010
2345214020
0723302040
1317350350
1317330370
4313000600
1317390610
0489352400
CASING NPS3”
CASING COVER
SUCTION COVER NPS3”
DRAIN COVER
DRAIN COVER HANDLE
IMPELLER
1
1
1
1
2
1
1
2
2
2
2
8
9
VOLUTE CASING
DRAIN COVER PUSH PLATE
DRAIN COVER SET HANDLE DIA.75 M12
HINGE BOLT M12 X 90
HINGE PIN
SPLIT PIN DIA. 4 X 30........................................2 ............. QP301TY
SPLIT PIN DIA. 4 X 30........................................2 ............. QP301TA
NIPPLE NPS3” X NPT 3”
PIPE FRAME
ENGINE BASE
CUSHION RUBBER DIA. 40 H20 M10
CHECK VALVE
SUCTION COVER PACKING
CASING COVER SET PLATE G65 .....................1 ............. QP301TY
CASING COVER SET PLATE .............................1 ............. QP301TA
O-RING (DRAIN COVER)
DIA. 3.5 X DIA. 240
10
11
12
13
13
14
15
16
17
18
19
20%
20%
21%
2
1
1
4
1
1
1
22
22
23%
0489353970
0489354020
0489312300
O-RING (CASING) DIA. 3.5 X DIA. 397...............1 ............. QP301TY
O-RING (CASING)DIA. 3.5 X DIA. 396................1 ............. QP301TA
O-RING (VOLUTE CASING)
1
DIA. 3.1 X DIA. 228
O-RING (NIPPLE) G80
O-RING (MECHANICAL SEAL SLEEVE) G25
O-RING (FLOODING DRAIN CAP) P30
FLOODING CAP PF1”
24
25%
26
27
28
29%
30
0481310800
0481310250
0480350300
0631211100
0631211100
0801123530
0811883056
2
1
3
1
DRAIN CAP PF1”
2
1 SET
1
MECHANICAL SEAL DIA. 30
MECHANICAL SEAL SLEEVE
DIA. 25.4 X DIA 30 X 56
31%
31%
32
33
34
35
35
0852834525
0852854525
0141090510
0141090820
0141050825
0131151235
014212030
ADJUST LINER DIA. 45 X DIA. 25 t0.3
ADJUST LINER DIA. 45 X DIA. 25 t0.5
SCREW (CHECK VALVE) M5 X 10
SCREW (VOLUTE CASING) M8 X 20
SCREW (DRAIN COVER HANDLE) M8 X 25
CAP SCREW (CASING) M12 X 35 .....................5 ............. QP301TY
CAP SCREW (CASING) M12 X 30 .....................5 ............. QP301TA
1
1
2
2
4
QP-301TY/QP-301TA TRASH PUMP — PARTS MANUAL— REV. 0 (09/08/10) — PAGE 9
QP-301TY/QP-301TA — PUMP ASSY.
PAGE 10 — QP-301TY/ QP-301TA TRASH PUMP — PARTS MANUAL — REV. #0 (09/08/10)
QP-301TY/QP-301TA — PUMP ASSY.
NO.
36
37
38
39
39
40
40
41
41
42
43
43
44
44
45
45
46
47
48
48
49
49
50
PART NO.
PART NAME
CAP SCREW (SUCTION COVER) M10 X 30
BOLT (PUMP) M10 X 30
QTY.
REMARKS
0131151030
0105051030
0105051045
0106050820
011708025
0401450100
031110160
0458220080
030208200
0401450050
0451250100
030210250
0451250080
030208200
0205450100
020310080
0742304080
0181050825
0401450080
0451250100
1317390610
43130006000014
KIT301T
4
2
4
BOLT (ENGINE) M10 X 45
BOLT (CASING COVER) M8 X 20-8T .................4 ............. QP301TY
BOLT (CASING COVER) 8 X 25 .........................4 ............. QP301TA
WASHER M10 .....................................................4 ............. QP301TY
WASHER, FLAT...................................................4 ............. QP301TA
SEAL WASHER M8 .............................................4 ............. QP301TY
WASHER, LOCK 8 MM .......................................4 ............. QP301TA
WASHER M5
2
WASHER, LOCK M10 .......................................14 ............. QP301TY
WASHER, LOCK M10 .......................................14 ............. QP301TA
WASHER, LOCK M8
WASHER, LOCK 8 MM
NUT (PUMP ENG CUSHION RUBBER) M10 ....14 ............. QP301TY
NUT (PUMP ENG CUSHION RUBBER) M10 ....14 ............. QP301TA
STRAINER NPT3”TRASH
BOLT M8 X 25
WASHER M8 .......................................................4 ............. QP301TY
WASHER M8 .......................................................4 ............. QP301TA
CASING COVER PACKING.................................1 ............. QP301TY
CASING COVER PACKING.................................1 ............. QP301TA
PUMP KIT ...........................................................1 ............. INCLUDES ITEMS W/%
6
6
1
4
QP-301TY/QP-301TA TRASH PUMP — PARTS MANUAL— REV. 0 (09/08/10) — PAGE 11
TERMS AND CONDITIONS OF SALE — PARTS
5. Parts must be in new and resalable
condition, in the original Multiquip
package (if any), and with Multiquip part
numbers clearly marked.
Multiquip reserves the right to quote and
sell direct to Government agencies, and to
Original Equipment Manufacturer accounts
who use our products as integral parts of their
own products.
PAYMENT TERMS
Terms of payment for parts are net 30 days.
FREIGHT POLICY
6. The following items are not returnable:
All parts orders will be shipped collect or
prepaid with the charges added to the invoice.
All shipments are F.O.B. point of origin.
Multiquip’s responsibility ceases when a
signed manifest has been obtained from the
carrier, and any claim for shortage or damage
must be settled between the consignee and
the carrier.
a. Obsolete parts. (If an item is in the
price book and shows as being
replaced by another item, it is
obsolete.)
SPECIAL EXPEDITING SERVICE
A $35.00 surcharge will be added to the
invoice for special handling including bus
shipments, insured parcel post or in cases
where Multiquip must personally deliver the
parts to the carrier.
b. Any parts with a limited shelf life
(such as gaskets, seals, “O” rings,
and other rubber parts) that were
purchased more than six months
prior to the return date.
LIMITATIONS OF SELLER’S LIABILITY
MINIMUM ORDER
Multiquip shall not be liable hereunder for
damages in excess of the purchase price of
the item with respect to which damages are
claimed, and in no event shall Multiquip be
liable for loss of profit or good will or for any
other special, consequential or incidental
damages.
The minimum charge for orders from Multiquip
is $15.00 net. Customers will be asked for
instructions regarding handling of orders not
meeting this requirement.
c. Any line item with an extended
dealer net price of less than
$5.00.
d. Special order items.
RETURNED GOODS POLICY
e. Electrical components.
f. Paint, chemicals, and lubricants.
g. Decals and paper products.
h. Items purchased in kits.
Return shipments will be accepted and
credit will be allowed, subject to the following
provisions:
LIMITATION OF WARRANTIES
No warranties, express or implied, are
made in connection with the sale of parts or
trade accessories nor as to any engine not
manufactured by Multiquip. Such warranties
made in connection with the sale of new,
complete units are made exclusively by a
statement of warranty packaged with such
units, and Multiquip neither assumes nor
authorizes any person to assume for it
any other obligation or liability whatever in
connection with the sale of its products. Apart
from such written statement of warranty,
there are no warranties, express, implied or
statutory, which extend beyond the description
of the products on the face hereof.
1. A Returned Material Authorization
must be approved by Multiquip prior to
shipment.
7. The sender will be notified of any material
received that is not acceptable.
8. Such material will be held for five
working days from notification, pending
instructions. If a reply is not received
within five days, the material will be
returned to the sender at his expense.
2. To obtain a Return Material Authorization,
a list must be provided to Multiquip
Parts Sales that defines item numbers,
quantities, and descriptions of the items
to be returned.
9. Credit on returned parts will be issued
at dealer net price at time of the original
purchase, less a 15% restocking
charge.
a. The parts numbers and descriptions
must match the current parts price
list.
b. The list must be typed or computer
generated.
10. In cases where an item is accepted, for
which the original purchase document
can not be determined, the price will be
based on the list price that was effective
twelve months prior to the RMA date.
c. The list must state the reason(s)
for the return.
Effective: February 22, 2006
d. The list must reference the sales
order(s) or invoice(s) under
which the items were originally
purchased.
11. Credit issued will be applied to future
purchases only.
PRICING AND REBATES
e. The list must include the name
and phone number of the person
requesting the RMA.
Prices are subject to change without prior
notice. Price changes are effective on a
specific date and all orders received on or
after that date will be billed at the revised price.
Rebates for price declines and added charges
for price increases will not be made for stock
on hand at the time of any price change.
3. AcopyoftheReturnMaterialAuthorization
must accompany the return shipment.
4. Freight is at the sender’s expense. All
parts must be returned freight prepaid to
Multiquip’s designated receiving point.
PAGE 12 — QP-301TY/ QP-301TA TRASH PUMP — PARTS MANUAL — REV. #0 (09/08/10)
NOTE PAGE
QP-301TY/QP-301TA TRASH PUMP — PARTS MANUAL— REV. 0 (09/08/10) — PAGE 13
PARTS MANUAL
HERE’S HOW TO GET HELP
PLEASE HAVE THE MODEL AND SERIAL
NUMBER ON-HAND WHEN CALLING
UNITED STATES
Multiquip Corporate Office
MQ Parts Department
18910 Wilmington Ave.
Carson, CA 90746
Contact: [email protected]
Tel. (800) 421-1244
Fax (800) 537-3927
800-427-1244
310-537-3700
Fax: 800-672-7877
Fax: 310-637-3284
Mayco Parts
Warranty Department
800-306-2926
310-537-3700
Fax: 800-672-7877
Fax: 310-637-3284
800-421-1244, Ext. 279
310-537-3700, Ext. 279
Fax: 310-537-1173
Fax: 310-631-5032
Service Department
Technical Assistance
800-421-1244
310-537-3700
Fax: 310-537-4259
800-478-1244
MEXICO
UNITED KINGDOM
MQ Cipsa
Multiquip (UK) Limited Head Office
Carr. Fed. Mexico-Puebla KM 126.5
Momoxpan, Cholula, Puebla 72760 Mexico
Contact: [email protected]
Tel: (52) 222-225-9900
Fax: (52) 222-285-0420
Unit 2, Northpoint Industrial Estate, Tel: 0161 339 2223
Fax: 0161 339 3226
Global Lane,
Dukinfield, Cheshire SK16 4UJ
Contact: [email protected]
CANADA
Multiquip
4110 Industriel Boul.
Laval, Quebec, Canada H7L 6V3
Contact: [email protected]
Tel: (450) 625-2244
Tel: (877) 963-4411
Fax: (450) 625-8664
© COPYRIGHT 2010, MULTIQUIP INC.
Multiquip Inc and the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property
of their respective owners and used with permission.
This manual MUST accompany the equipment at all times.This manual is considered a permanent part of the equipment and should remain with the unit if resold.
The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in
this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications, design or the information published
in this publication at any time without notice and without incurring any obligations.
Your Local Dealer is:
|