Miller Sturdi-Saw 1 and Mini 1 (8HP thru 15HP push saws)
Standard Features
o Welded box frame construction
o Quick release 11⁄4″ arbor shaft with self-align-
ing pillow block ball bearings
o Complete console with operating instructions,
stop switch and engine throttle
o Adjustable engine motor mount
o Console mounted, low resistance manual
crank lift with locking mechanism
o Quick disconnect sheaves
Sturdi-Saw 1
oth the Series 1 and Mini 1 saws share a
number of design features that make
them the most durable and easily main-
The quick disconnect bushings used on
the arbor shaft and motor output shaft allow
the sheaves to be easily removed, even after
years of service. The laminar flow water sys-
tem optimizes water flow on the blade. This
improved water system reduces spray while
delivering more water where the blade meets
the surface.
B
tained push saws available. The quick release
blade collars make it easy to install and remove
the blades, eliminating arbor damage caused by
not adequately tightening the arbor nut.
With the engine mounted forward on the
frame, the weight is concentrated over the
arbor. This helps keep the blade in the cut,
thereby increasing cutting speeds.
The tough welded box design reduces
vibration and provides the most stable sawing
platform in the industry. This boxed design is
a Miller original and eliminates the“frame
twist”that is common in saws of lighter con-
struction. This construction minimizes blade
bounce resulting in longer blade life and
improved cutting performance.
Mini Saw 1
Sturdi-Saw Specifications
Mini
Saw 1
Mini
Saw 1
Mini
5⁄8″
3⁄4″
Saw 1
3⁄4″
3⁄4″
11⁄4″ with Quick
Disconnect collar
Rear axle
Front axle
Length
Blade capacity 12″-14″
12″-18″
Arbor
Blade Guard One piece Hinged
Arbor belts
Blade collar
(3) cog type V belts
(2 for 8 Mini only)
36″
21″
36″
42″
24″
37″
Engine
8-13HP
13-15HP
Width
Sheaves
3 groove (2 groove
for 8HP Mini only)
31⁄2″ dia.
Quick Release
4″ dia.
Height
Depth of Cut
12”Blade
Bushings
Quick Disconnect
bushing
4″
3.75″
4.75″
5.75″
6.75″
Front wheels 4″ x 2″
4″ x 2″
14”Blade
5″
Rear wheels 6″ x 2″
8″ x 2″
16”Blade
NA
NA
18”Blade
–8–
|